|
The Connected Electronics case features the 'TC' Aquaclip a wire-thru seal which is watertight allowing wires up to 2.5mm (1/10th inch) thick to be used with your equipment. Details: Use your equipment normally in the case as sound and signal pass right through the material. If using a stylus, it can be used normally through the clear window on the case. The airtight seal means your equipment will float safely if you drop it in water. CAUTION! We recommend the case for surface use mainly. Not for continued submersion. -------------------------------------------------------------------------------- Supplied with: - A detachable neck cord
- An adjustable belt
- It comes with our 3-year global warranty (see 'Buy with confidence' below).
- The Use of Aquapac Cases with Insulin Pumps
Before using your Aquapac with an insulin pump please read this. The Use of Aquapac Cases with Insulin PumpsAquapac have commissioned research by Imperial College London into the use of the 154 (Radio Microphone case) and 554 (Connected Electronics case) after receiving a large number of customer enquiries regarding their suitablity for use with insulin pumps. Results show that, in some circumstances, insulin flow rate can be reduced by the case. In particular, low flow rates are impeded, and as such Aquapac can make no claim regarding the suitablity of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user. Aquapac has been advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels.
The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:
2U/hr not in a case - 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 - 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 - 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 - 0.0121g (flow rate 92%)
10U/hr not in case - 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 - 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 - 0.0903g (flow rate of 100%)
21st August 2006 How have you improved this case recently? 2008 sees us going '100% PVC-Free'. Our new material (TPU) offers a number of advantages: - It's softer and more malleable. Making it even easier to operate your equipment through the material.
- It'll perform much better if you want to take it somewhere really cold. It'll still be soft and malleable at -40º and below.
- It has a greater tensile strength, meaning it's even more difficult to tear or rip apart.
-------------------------------------------------------------------------------- How big is the case? Dimensions: Maximum size of equipment to fit in case: Length: 8.75in/225mm Circumference: 9.75in/250mm
|